Parrot AR Drone 1.0 & 2.0 Propellers -Orange Replacement Parts Prop (2 sets!)

I ordered these for my son's Parrot drone, got them in 2 days, installed them and on take off, one of them instantly shattered, thought it was probably a defective piece, Called them up and they sent me another set for free, installed them and started flying the drone, 10 seconds into it's flight another one shattered. would not recommend these.

don't get this product they broke when i was trying to put it on my ar drone 2.0 i thought that i might have been rough trying to put it on so i ignored it and put on the other ones, when i started flying i realized it was very unstable and it was harder for my drone to recover just after a simple movement. Then after leaving it hovering thinking that it just needed to be run a little bit or to be "broke in" it drifted over and hit a car from the slight breeze. I flying my drone in very strong winds before (10-20 mph) and never had a problem it never moved from the spot it started. Then when the propellers hit the car it broke completely only piece left was the section that hold onto the gear i would have used a no star if it were possible do not get this product i think that it is a very poor designed product i am disappointed with ultra flight because their gears work great this was very misleading.

I was very excited to receive both of the "upgraded" gears and propellers made by UltraFlight. Unfortunately, I was disappointed. The gears seem to be okay, but the propellers aren't molded quite right and requires some filing down. I compared them to the original propellers and confirmed that the two supporting shafts that sit on either side of where the pin shoots through seem to be a hair too long. As a result, I was able to put it all together and get the C clamp on, but there was so much friction from the added tension that if the AR Drone was able to achieve flight, it would last only a few minutes and the motors would burn out quickly. What I ended up doing, was, filing down the gear where the two supporting shafts meet the gear. After that, it was much easier to spin the propeller. Also, when setting the propeller onto the gear, it was very tight and very difficult to separate, unlike the original parts.Overall, I would definitely NOT recommend these propellers. I shouldn't have to modify the blade or my own gear just to make it work. From now on, I would stick with OEM parts only. I hope this helps!EDIT: After finally filing down and putting everything back together, I was able to go out for a test flight. Again, I was very disappointed. The propellers are incredibly unbalanced which makes for very bad video recordings and it really struggled to get any altitude. I tried doing a flip about 20 feet in the air an almost crashed because the motors were struggling so much to keep up. With the original propellers, you can hear a very distinct sound when the quad is accenting and it moves upwards quickly, but with the UltraFlight propellers, the sound difference is minute and movement upwards is slow. Again, I would NOT recommend. I'm sticking with original parts from now on.

I didn't think these would make that much of a difference from the original ones but when I broke one my original propellers, I bought these. My drone is alot more stable with these on and way more resposive. It took me about 10 minutes to change them out. I like the look of the orange propellers too. I will definitely buy them again when I need them.

These Propellers look great, but that's it. As someone stated in a previous post, the alignment of he gear and propeller was poor and the center hole for the shaft did not line up creating a bind in the shaft. I needed to file the offset on the gear and blade mating post to get the shaft hole to line up.I finally got it to line up and all the blades spinning and working great. When I went to fly it, I came too close to the tree and grazed the leaves and 2 blades snapped like tooth picks and the gears stripped out.

You would think that the ultraflight gears and props would fit together better then the ultraflight gears with the stock props but they don't. You can fix them but it's kinda a pain. Plus the ultraflight props do not have near the lift as the stock props so if you are pushing the weight limit on the drone I would not get these. Over all these props were a big wast of money mine are just setting in my closet because I have no use for them. The ultraflight gears on the other hand are great, cuts down on weight, fits good to stock props, and looks good on drone.

Junk. Not the right pitch for the quad drone. Would not get off the ground. Somebody screwed this one up.

After installing the propellers that showed up a week late, one of them broke within 20 seconds with the Indoor foam hull mounted. These are absolutely worthless as far as I am concerned. I will just be sticking with stock from now on.